HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de

PROFI AUXX

PRODUCT ADVANTAGES

  • Wash Program POWER-PLUS: selectable higher pressure program to wash heavily soiled wash items
  • Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump, drain pump and chemical dispenser
  • Fine Filter System GENIUS-X²: advanced filter system with prewash function reduces detergent consumption by up to 30%
  • Electronic Control SMARTRONIC: with color-coded status indication
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Insulated hood reduces noise and heat loss up to 50%
  • Rinse Pump ACCURINSE: guarantees a constant 2.5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • Water Softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6.5 kW

TECHNICAL DATA

 Flexible drain hose 2,000 mm
 
20 mm inner / 25 mm outer diam.
 Fresh water connection:
pressure hose 2,000 mm
flow pressure


necesarry water flow
 
R 3/4" inside
0.5 - 10 bar max 60°C
softener models:
0.8 - 10 bar
5 l/min
 
 Power cord  2,500 mm
 Hoses for detergent
and rinse agent
 
2,000 mm each
 Cycle times 1)  52 sec.
90 sec.
240 sec.
endless
 
 Water consumption
 
 2.5 l / rack
 
 Tank capacity  40 l
 Tank heating  2.5 kW
 Power supply  400 / 50 / 3 / N
 Booster loading  12.3 kW
 Total loading  17.1 kW / 3 x 35 A
 Pump capacity  2 x 1.1 kW / 600 l/min
 Loading height  440 mm
 Noise level  68 dB(A)
 Weight net  appr. 135 kg
1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

BROCHURE

For further brochures or other languages please contact your dealer or contact us.

ACCESSORIES

Description 

Back panel
(if unit is not installed against wall,
all units have closing frame to wall at rear)

Corner splash panel
for open gap to the wall in case of corner installation

Thermolabel
 

Automatic hoodlift
requires 2.5 bar line pressure, lead time on request

for line pressures < 2.5 bar:
additional pressure pump + retrofit kit
hoodlift with pressure pump installed



 
Username
Password
Genial Einfach Genial1

HOBART worldwide

HOBART worldwide

Distributor map

Find your distributor:
 
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de