HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de
Content | Imprint | Print

PREMAX AUP

PREMAX AUP Hood-type dishwasher

PRODUCT ADVANTAGES

  • VAPO RINSE ECO: switchable steam rinse cycle reduces fresh water consumption to 1.6 l/cycle
  • WASHING HOT-TEMP: higher temperature of 63°C increases the capacity up to 75 racks/h
  • Cutlery cycle: removes even persistent residues by the use of steam 
  • Insulated hood reduces noise and heat loss up to 50%
  • Deep clean wash program STARCH REMOVAL removes the starch from the crockery
  • Wash system ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
  • Wash program POWER-PLUS: selectable higher pressure program to wash heavily soiled wash items
  • Fine filter system GENIUS-X²: advanced filter system with prewash function reduces detergent consumption by up to 30%
  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump, drain pump and chemical dispenser
  • Single button operation SMARTRONIC: with color-coded status indication of remaining cycle time
  • Hood design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
  • Hood concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Rinse pump ACCURINSE: guarantees a constant 1.6/2.3 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals
  • Wide angle nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • Hygiene program ACTIVE and hygiene tab INTENSIVE: remove calcium carbonate and other deposits from tank wall
  • Water softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6.5 kW

TECHNICAL DATA

Flexible drain hose 2,000 mm  20mm inner / 25mm outer diam.  
Fresh water connection:
pressure hose 1,500 mm
flow pressure


necessary waterflow
 
R 3/4" inside
0.5 - 10 bar max 60°C
softener models:
0.8 - 10 bar
5 l/min
 
 Power cord  2,500 mm
Hoses for detergent and rinse agent  2,000 mm each
 Cycle times 1)  47 sec.
70 sec.
170 sec.
360 sec.
 Water consumption  1.6/2.3 l / rack
 Tank capacity  40 l
 Tank heating   2.5 kW
 Power supply  400 / 50 / 3 / N
 Booster loading  12.3 (6.15) kW
 Total loading  17.1 kW / 3 x 35 A
(10.9 kW / 3 x 25 A)
 Pump capacity  2 x 1.1 kW
Loading height  440 mm
 Noise level  70 dB (A)
68 db (A) insul.
 Weight net  appr. 135 kg
1) To reach set rinse temperatures even with cold water connection,
the actual cycle-times extend accordingly.

For further brochures or other languages please contact your dealer or contact us.

ACCESSORIES

Description
Back panel
Corner splash panel
for open gap to the wall in case of corner installation
Automatic hoodlift
(opening height 400 mm / back panel included)
requires 2.5 bar line pressure, lead time on request

for line pressures < 2.5 bar:
additional pressure pump retrofit kit
hoodlift with pressure pump installed
Hygiene chemical tablets INTENSIVE
Box with 15 tabs or
10 boxes à 15 tabs


 
Username
Password
Genial Einfach Genial1

HOBART worldwide

HOBART worldwide

Distributor map

Find your distributor:
 
HOBART GmbH
Robert-Bosch-Str. 17
77656 Offenburg/ GERMANY
Phone +49 (0)781.600-28 20
Fax +49 (0)781.600-28 19
info-export@hobart.de